# Commercial Door Service Toronto | Same-Day Repair

> Same-day commercial door service in Toronto for storefronts, offices and warehouses. Closers, hinges, pivots, panic bars. $450-$1,200, written scope first.

URL: https://torontocommercialdoorrepair.ca/commercial-door-repair/

Door Repair B2B Commercial Only

# Commercial Door Service & Repair Toronto, ON | Storefront, Office & Automatic Door Service

By Toronto Commercial Door Repair Crew | Last updated: October 12, 2026

Same-day commercial door service across Toronto and the GTA for storefronts, office towers, condo entrances and warehouse admin doors. Technicians diagnose hardware wear on Dorma, LCN, Von Duprin and Adams Rite systems, replace hinges, closers, pivots and panic bars, and re-align sagging aluminum entrance doors in a single visit wherever possible. The $225 service call is credited to same-visit repairs, and every job starts with a written CAD scope.

$450 - $1,200 per repair visit | $225 service call credited to same-visit repair

-   Hinge/closer diagnosis
-   Pivot alignment
-   Panic bar reset
-   Weatherstripping check

Timeline: Same-day typical; crew of 1-2

**Commercial doors only:** we do NOT service residential, garage or interior doors.

Get a Written Quote

[#capture-form →](#capture-form)

 

Call 24/7 (437) 555-0146

[tel:+14375550146 →](tel:+14375550146)

![Crew in navy workwear installing a Dorma closer on a Toronto storefront door](/images/misc/crew-in-navy-workwear-installing-a-dorma-closer-on.webp) CDHA Member / WSIB + $5M CGL 500+ commercial properties

24/7 EMERGENCY DISPATCH

CDHA MEMBER

NFPA 80 TRAINED

WSIB + $5M CGL

Common Problems We Fix

## What Goes Wrong Before Property Managers Call About Door Service & Repair?

### Doors that drag, sag or will not latch

Worn offset pivots, stripped hinge screws and leaking closers let a door drop until it scrapes the threshold or bounces off the strike. Tenants start propping it open, and the opening is no longer secure.

### Three trades for one opening

A locksmith for the lock, a glazier for the glass and a handyman for the closer means three invoices and three schedules. Nobody owns the result, and the same door fails again next season.

### Parts nobody stocks

Dorma, LCN, Von Duprin and Adams Rite hardware is not sold at a hardware counter. Generic substitutes fit badly, wear out fast and can void the fire label on a rated opening.

### Trip charges that grow after the quote

A free quote that turns into an $800 trip charge is common in this trade. Budget-holders need a written CAD scope and a range before anyone touches the door.

## What Does Commercial Door Service Cover in Toronto?

Commercial door service is the visit you book when a door is not doing its job: it will not latch, it drags on the threshold, it slams, or the panic bar sticks. In Toronto, most of those calls come from storefronts, office towers, condo entrances and warehouse admin doors, and most of them trace back to the same few parts. Hinges and pivots wear. Closers leak. Exit devices get bent. Weatherstripping tears.

A single commercial door is a system. The hinge or pivot carries the weight, the closer controls the swing, the lock or exit device holds the door shut, and the frame and strike line everything up. When one part fails, the others work harder until they fail too. That is why a good service visit looks at the whole opening, not just the part that broke first.

Our technicians work only on commercial doors, the same focus behind all of our 

commercial door repair across Toronto and the GTA

[/ →](/)

. On a typical visit they will:

-   Diagnose hinge, pivot and closer wear on Dorma, LCN and Hager hardware
-   Re-align sagging aluminum entrance doors and re-set offset pivots
-   Reset or repair Von Duprin and other panic bars and check free egress
-   Re-time Adams Rite cylinders and deadlatches on storefront doors
-   Check thresholds, sweeps and weatherstripping for drafts and drag
-   Tighten or re-anchor stripped hinge and frame screws

## Why Commercial Doors Fail Faster Than You Expect

A busy storefront door can cycle hundreds of times a day. An office tower lobby door can cycle thousands. Add Toronto winters, road salt tracked in on boots and freeze-thaw cycles that thin closer fluid, and commercial hardware wears out on a schedule nobody plans for.

### Hinges and pivots

Offset pivots and butt hinges carry the full weight of the door. As the bearing wears, the door drops on the latch side. The fix might be a new pivot set, a re-anchored top hinge or a conversion to a continuous geared hinge on doors that keep failing. See our 

commercial door hinge repair

[/commercial-door-hinge-repair/ →](/commercial-door-hinge-repair/)

 page for details on conversions.

### Closers

A closer that leaks oil cannot control the door. It slams, bounces off the strike or stops short of latching. Toronto freeze-thaw cycles are hard on closer seals, and a leaking body is replaced rather than refilled. Our 

commercial door closer repair

[/commercial-door-closer-repair/ →](/commercial-door-closer-repair/)

 page covers Dorma, LCN and Hager service in depth.

### Locks and exit devices

Bent vertical rods, worn latch bolts and misaligned strikes are the usual culprits when a rear exit will not latch. On fire-rated doors, a door that does not positively latch is an inspection failure. The 

push bar repair

[/commercial-door-push-bar-repair/ →](/commercial-door-push-bar-repair/)

 page explains how we test egress before leaving.

## What a Typical Repair Visit Looks Like

Most commercial door repairs are finished in one visit by a crew of one or two. The technician arrives with common parts, inspects the opening and gives you a written CAD scope before starting. If you approve it, the work usually happens on the spot.

| Repair type | Typical range (CAD) | Typical time on site |
| --- | --- | --- |
| Closer adjustment or replacement | $350 - $850 | 1 - 2 hours |
| Pivot set or hinge repair | $280 - $950 | 2 - 4 hours |
| Panic bar repair and egress test | $420 - $1,400 | 2 - 4 hours |
| Multi-component repair, one opening | $450 - $1,200 | 2 - 5 hours |

These are ranges, not quotes. Door type, hardware brand, access and after-hours timing all move the number, and your written scope confirms it before any work.

## The $225 Service Call, Explained

Every visit has a $225 minimum service call. It covers travel, diagnosis and the first part of the job. When we complete the repair on the same visit, the $225 is credited to the repair. You are not paying for a diagnosis and then paying again to fix the door.

This matters because the most common complaint we hear from property managers is about pricing games: a free quote that becomes an $800 trip charge once the truck shows up. Our approach is the opposite. You see the range before we come out, and you see the written scope before we start.

## When Do You Need Commercial Door Service?

Book a service visit when you notice any of these:

-   The door drags on the threshold or leaves marks on the floor
-   The door slams, or stops short and does not latch
-   Oil on the closer body or on the floor under it
-   A gap at the top or latch side that lets daylight or cold air through
-   The panic bar sticks, or the door can be pulled open after it closes
-   Staff or tenants are propping the door open to avoid fighting it

Waiting usually costs more. A worn pivot left alone will wreck the closer, then bend the arm, then crack the stile on an aluminum door. Catching it early keeps the repair in the low end of the range.

## Commercial Door Service for Property Managers

If you manage a condo, office tower or retail plaza, one-off repairs add up. Our crews keep every door in a shared tracker, log every ticket and part, and close tickets fast. On one Toronto Community Housing portfolio, two technicians ran a weekly route across 12 mid-rises and closed every ticket within 48 hours.

Many property managers move to a 

commercial door maintenance contract

[/commercial-door-maintenance-contracts/ →](/commercial-door-maintenance-contracts/)

 after a season of service calls. Quarterly or semi-annual visits catch closer and pivot wear before it becomes an emergency, and each visit ends with a written report.

## DIY or Handyman vs a Commercial Door Contractor

A handyman can tighten a screw. The trouble starts when a commercial door needs a part. Dorma, LCN, Von Duprin and Adams Rite hardware is built to ANSI/BHMA Grade 1 standards and is not sold at a hardware counter. Generic parts often fit poorly, wear fast and, on a fire-rated door, can put the label at risk.

A commercial door contractor carries the right parts, knows how a Division 8 opening is supposed to work, and can document the repair for your insurer or fire inspector. When a door protects your inventory, your tenants or an exit route, that difference is worth the call.

## Toronto Codes That Touch a Simple Repair

Even a routine repair can bring code into play. Fire-rated doors must self-close and positively latch under NFPA 80 and the Ontario Fire Code. Exit doors must open freely without keys. Toronto Municipal Code Chapter 629 property standards require doors and hardware to be kept in good repair. Our technicians flag these issues on the written scope so you can deal with them before an inspector does.

Pricing Transparency

## How Much Does Commercial Door Repair Cost in Toronto?

Commercial Door Repair

$450 - $1,200

per repair visit (CAD, before HST)

$225 service call credited to same-visit repair

-   Ranges only, never a verbal number
-   $225 service call credited to same-visit repair
-   Final price confirmed in a written CAD scope

What moves the price

Door type and stile, hardware brand and grade, fire rating, access, after-hours timing and how many openings are done in one visit.

Payment

30% deposit over $2,500, NET-15 for PMs. e-Transfer, cheque, Visa/Mastercard.

Warranty

Workmanship warranty plus manufacturer warranties passed through. Terms on your written estimate.

Insurance

We direct-bill major commercial property insurance claims for break-ins, vandalism and impact damage.

How It Works

## How Does Commercial Door Repair Work, Step by Step?

1.  1
    
    ### Live dispatch and triage
    
    Call 24/7 or send the form. Dispatch confirms the door type, the hardware brand if you can see it and how urgent it is. Security and egress problems are scheduled first.
    
2.  2
    
    ### Site assessment and written scope
    
    The technician inspects the opening, photographs the hardware and issues a written CAD scope with a price range. Nothing is ordered or installed before you approve it.
    
3.  3
    
    ### Same-visit repair
    
    Common closers, pivots, hinges and exit device parts ride on the truck, so most repairs are finished the same visit. Specialty parts are sourced within 7 business days.
    
4.  4
    
    ### Test, document and close out
    
    The door is cycled, latching and egress are tested, and you receive a short report with photos. On rated doors we note NFPA 80 items for your file.
    

No work starts until you approve a written CAD scope, and the $225 service call is credited to a same-visit repair.

Get a Written Quote

[#capture-form →](#capture-form)

 

Call 24/7

[tel:+14375550146 →](tel:+14375550146)

Free Cost Tool

## Try the Commercial Door Repair Cost Estimator

Get a typical price range for common commercial door repairs and installs in Toronto and the GTA.

Use the estimator

[/tools/commercial-door-repair-cost-estimator/ →](/tools/commercial-door-repair-cost-estimator/)

What Makes Us Different

## Why Do GTA Property Managers Choose Us for Door Service & Repair?

### Commercial doors only

Storefront, office tower, warehouse, condo entrance and fire-rated doors. No residential, garage or interior work, so the trucks carry commercial parts.

### Written scope first

Every job starts with a written CAD scope and a published range. Clients report invoices that match the estimate to the dollar.

### One contact per portfolio

Property managers get one crew lead for every building, plus a shared tracker of every door, ticket and part.

### Parts on the truck

Dorma, LCN, Von Duprin, Adams Rite, Hager and Yale parts stocked, with anything else typically sourced within 7 business days.

Recent Work

## Commercial Door Repair Work Across the GTA

Click any photo to enlarge. More before-and-after shots are in the 

project gallery

[/gallery/ →](/gallery/)

.

 

Related Services

## Related Commercial Door Services

![Technician adjusting the valves on an LCN surface closer above a condo corridor fire door](/images/misc/technician-adjusting-the-valves-on-an-lcn-surface-.webp)

[/commercial-door-closer-repair/ →](/commercial-door-closer-repair/)

### 

Commercial Door Closer Repair

[/commercial-door-closer-repair/ →](/commercial-door-closer-repair/)

$350 - $850

Door closers are the most-replaced hardware on any commercial opening, and Toronto freeze-thaw cycles make them leak, slam or fail to latch. Service covers surface-mounted, concealed overhead and floor closers from Dorma, LCN and Hager, including the LCN 4040XP and Dorma 8900 series. Technicians adjust sweep, latch and backcheck valves, swap leaking bodies and confirm fire doors self-close and positively latch to NFPA 80.

Includes: Sweep and latch adjustment·Leaking closer replacement·Arm and drop plate swap·Fire-door latch check

Timeline: Same-day typical; crew of 1

A North York condo board had 18 corridor fire doors failing to latch ahead of a fire marshal walkthrough. The crew replaced six leaking LCN closers, adjusted the rest and documented every door in a written NFPA 80 report. All 18 doors passed on the re-inspection, and the board moved the building onto a semi-annual service contract.

View Commercial Door Closer Repair details

[/commercial-door-closer-repair/ →](/commercial-door-closer-repair/)

![Technician fastening a continuous geared hinge to an aluminum plaza entrance door](/images/misc/technician-fastening-a-continuous-geared-hinge-to-.webp)

[/commercial-door-hinge-repair/ →](/commercial-door-hinge-repair/)

### 

Commercial Door Hinge Repair

[/commercial-door-hinge-repair/ →](/commercial-door-hinge-repair/)

$280 - $950

Sagging doors almost always start at the hinge or pivot. Repairs cover continuous geared hinges, full-mortise ball-bearing butt hinges and offset and intermediate pivots on aluminum, hollow metal and wood commercial doors, with Hager and Roton-style continuous hinge conversions for high-traffic entrances. Technicians re-anchor stripped frame screws, shim hinge jambs and restore clearances so the closer and lock stop fighting the door.

Includes: Pivot set replacement·Continuous hinge conversion·Frame screw re-anchoring·Clearance reset

Timeline: 2-4 hours typical; crew of 1-2

A Richmond Hill retail plaza manager had three entrance doors dragging on the threshold every winter. Worn offset pivots were letting the doors drop. The crew converted all three to continuous geared hinges in one morning, re-set the closers and cleared the thresholds. Tenants kept trading through the install, and the plaza has not logged a sag complaint since.

Request a Commercial Door Hinge Repair quote

[/commercial-door-hinge-repair/ →](/commercial-door-hinge-repair/)

![Technician replacing the vertical rod on a Von Duprin panic bar on a steel warehouse exit door](/images/misc/technician-replacing-the-vertical-rod-on-a-von-dup.webp)

[/commercial-door-push-bar-repair/ →](/commercial-door-push-bar-repair/)

### 

Commercial Door Push Bar Repair

[/commercial-door-push-bar-repair/ →](/commercial-door-push-bar-repair/)

$420 - $1,400

Panic hardware has to work every time, which is why Ontario Fire Code inspectors test it first. Repairs cover Von Duprin 98 and 99 series rim, vertical rod and mortise exit devices plus Corbin Russwin, Sargent and Yale equivalents. Technicians replace bent vertical rods and worn latch bolts, re-align strikes, rebuild sticky push pads and remove dogging from fire-rated doors where it is not permitted. Every device is tested for free egress before the crew leaves.

Includes: Rod and latch replacement·Strike re-alignment·Dogging removal on fire doors·Egress function test

Timeline: 2-4 hours typical; crew of 1

A Vaughan warehouse owner had a rear exit door with a Von Duprin 99 that would not latch after a forklift clipped the vertical rod. The crew replaced the rods and top latch, re-aligned the strike and re-tested egress the same afternoon. Total downtime was under three hours, and the door passed the insurer's site inspection the following week without a note.

See Push Bar Repair pricing and options

[/commercial-door-push-bar-repair/ →](/commercial-door-push-bar-repair/)

View all 22 commercial door services

[/services/ →](/services/)

Commercial Door Repair service area: Toronto (2-hour typical emergency arrival) plus 

Mississauga

[/service-areas/mississauga/ →](/service-areas/mississauga/)

 , 

Vaughan

[/service-areas/vaughan/ →](/service-areas/vaughan/)

 , 

Markham

[/service-areas/markham/ →](/service-areas/markham/)

 , 

Brampton

[/service-areas/brampton/ →](/service-areas/brampton/)

 , 

Richmond Hill

[/service-areas/richmond-hill/ →](/service-areas/richmond-hill/)

 , 

Oakville

[/service-areas/oakville/ →](/service-areas/oakville/)

 , 

Scarborough

[/service-areas/scarborough/ →](/service-areas/scarborough/)

 , 

Etobicoke

[/service-areas/etobicoke/ →](/service-areas/etobicoke/)

 , 

North York

[/service-areas/north-york/ →](/service-areas/north-york/)

 , 

Newmarket

[/service-areas/newmarket/ →](/service-areas/newmarket/)

 and 15 more GTA municipalities within about 50km (4-hour typical arrival across the 905). 

See all service areas

[/service-areas/ →](/service-areas/)

Client Feedback

## What Clients Report After Door Service & Repair Work

Clients report the same three things: fast arrival, a written scope before work, and invoices that match it.

Sam K. | Downtown Oakville$1,600

> "Our boutique entrance is the first thing customers see, so a dragging aluminum door with a chipped stile was a problem. They replaced the worn pivots, adjusted the concealed closer and matched the hardware finish so nothing looks patched. The tech explained what had failed and what to watch for, and the written estimate was exactly what we paid. The door now closes silently and locks every night."

Boutique owner | Storefront Door Repair

Yusuf B. | North York$4,400

> "Laminated glass upgrade after a smash-and-grab. Boarded that night, new glass in three days, and the claim was billed directly to our insurer."

Plaza owner | Commercial Glass Door Replacement

Andre T. | King West, Toronto$3,100

> "Glass boarded before opening, replaced in three days."

Restaurant owner | Commercial Glass Door Replacement

Commercial Trade Answers

## Commercial Door Repair FAQs

### What does a commercial door service call include?

A service call covers travel, diagnosis and the first hour on site. The technician checks the hinges or pivots, closer, lock or exit device, strike, threshold and weatherstripping, then writes up what failed and what it will cost to fix. The $225 service call is credited to the repair when the work is completed on the same visit, which it usually is for closers, pivots, hinges and panic hardware.

### How much does commercial door repair cost in Toronto?

Most multi-component commercial door repairs land between $450 and $1,200. Single closer swaps can come in lower, while jobs that combine a pivot set, a closer and a lock on an aluminum storefront sit near the top of the range. Automatic operators, full door replacements and fire-rated assemblies are priced separately on their own pages. Every job gets a written CAD scope before work starts.

### Can you repair the door the same day?

Usually, yes. The trucks carry common Division 8 parts, including Dorma and LCN closers, offset pivots, continuous hinges, Von Duprin parts and Adams Rite deadlatches. When a specific part is not on board, the opening is secured and the part is typically sourced within 7 business days.

### Do you repair storefront, office and warehouse doors on the same visit?

Yes. Property managers often stack several openings into one visit, such as a sagging lobby door, a leaking closer on a corridor door and a sticky push bar on a rear exit. Stacking work keeps the service call to one charge and gets the whole building sorted in a single trip.

### Which hardware brands do you repair?

We work on Dorma, LCN, Von Duprin, Adams Rite, Hager, Yale, Corbin Russwin and Sargent hardware, plus Kawneer, YKK AP and Vistawall aluminum entrance components. We match replacement parts to ANSI/BHMA Grade 1 where the opening calls for it.

### My door sags and scrapes the floor. Is that a hinge or a closer problem?

Usually the hinge or pivot. A worn offset pivot or a stripped top hinge lets the door drop on the latch side, and the closer then fights the door instead of controlling it. We re-anchor or replace the hinge or pivot first, then re-set the closer, so the fix lasts.

### Do you service residential or garage doors?

No. We service commercial storefront, office, warehouse, condo entrance and fire-rated doors only. We do not work on residential doors, garage doors or interior doors.

### Can you look after every door in a building or portfolio?

Yes. Many property managers start with a single repair and then move to a quarterly or semi-annual service contract. Each visit covers closers, hinges, pivots, panic hardware and weatherstripping across the building, with a written report and an NFPA 80 compliance report for rated doors.

### What are your payment terms?

We take a 30% deposit on orders over $2,500 and offer NET-15 terms for property management clients. We accept e-Transfer, cheque, Visa and Mastercard.

### Do you warranty commercial door repairs?

Yes. Workmanship is warrantied and manufacturer warranties on new hardware are passed through to you. The warranty terms for your job are listed on the written estimate.

Still have a question about your opening?

Live dispatch answers any hour. Send photos with the form for a faster written scope.

Call (437) 555-0146

[tel:+14375550146 →](tel:+14375550146)

Get a Written Quote

[#capture-form →](#capture-form)

![Commercial door crew finishing an entrance install in Toronto](/images/misc/crew-in-navy-workwear-closing-out-a-finished-alumi.webp)

Live dispatch answering now

## Ready to Book Commercial Door Repair?

Send the form for a written CAD scope on your door service & repair job within 2 business hours, or call live dispatch 24/7. Typical range $450 - $1,200.

Call 24/7 (437) 555-0146

[tel:+14375550146 →](tel:+14375550146)

-   Written CAD scope first
-   WSIB + $5M CGL
-   Insurance claims direct-billed

Thanks. Your request is in.

Our dispatch desk will reply within 2 business hours. For an active emergency, call 

(437) 555-0146

[tel:+14375550146 →](tel:+14375550146)

 any time.

## Request a Written CAD Estimate

Dispatch desk reply within 2 business hours. No verbal estimates.
